The ITC2 is an isothermal proportional controller for use in thermal systems common to analytical instrumentation, and is most often used with Valco Heated Valve Enclosures (HVEs).
The desired temperature, from 0°C to 400°C, is set in 1°C increments on the front panel. A thermocouple sensor permits quick recognition of temperature changes, providing temperature control within 1°C of the setpoint.
Maximum output current is 5 amps, provided via an IEC320 C14 connector. An adapter cord to NEMA 5-15R is provided for convenient connection to 110 VAC HVE heater assemblies. Connection to other than 110 VAC assemblies requires the appropriate adapter, not included.
Instrumentation temperature controller
Description | Product No. |
---|---|
Instrumentation Temperature Controller | ITC2 |
Replacement thermocouple | I-21014-01 |
Specifications
Power supply | 100 to 240 VAC (±10%), 50/60Hz |
Maximum consumption | 1100 VA |
Operation temperature | 0 - 50°C |
Relative humidity | 80% @ 30°C* |
Input | Type K thermocouple |
Internal resolution | 15 bits |
Resolution of display | 0.1° Celsius |
Control Range | -20° to 400° Celsius |
Rate of reading | Up to 5/second |
Accuracy | ± 0.25% of span ± 1 degree |
Output | 5 amps max, 100-240 VAC |
* For temperatures above 30° Celsius, reduce 3% for each degree.