(for selectors)Standoff assemblies
The standoff is an extension shaft mounted between the handle or actuator and the valve, allowing the valve to be installed within a heated zone while the atuator or handle remains outside at room temperature.
- For manual actuation
- For actuators:
Closemount hardware
If a valve is not going to be heated beyond the temperature range of the actuator, closemount hardware often makes the cleanest installation.
Knobs and handles
If you already have a spare standoff assembly but lack the knob or retainer, or have an actuated valve on a standoff which you'd like to convert to manual use, here's what you'll need.
Right angle drive
Some installations don't allow the valve and actuator to be installed in a typical in-line configuration. The right angle drive, which fits all our two position actuators, is a 90° gearbox which permits the actuator or handle to be installed at a right angle to the valve.
