| 5,000 psi | |
| Microbore | |
| Vertical port | |
| 1/16" | 0.25 mm |
Model C2V is designed specifically for use in an autosampler. It is like the standard Model C2 except that the sample port is perpendicular to the valve axis. This permits the valve and actuator to be installed horizontally, while the syringe loads the injector vertically.
Direct syringe loading with a C2V injector allows a choice between the partial-filling method, in which the injection volume is determined by a syringe, and full-loop injection, in which the volume is determined by the size of the loop.
Valves with a PAEK stator include 1/16" PEEK nuts and ferrules and a 5 µl PEEK sample loop. Valves with an N60 stator include 1/16" stainless steel nuts and ferrules and a 5 µl SS sample loop. (Order other sample loops separately.)
Microbore HPLC vertical port injectors
Microelectric and universal actuators:
24 VDC, with 110/230 VAC to 24 VDC power supply
| Stator material | Description | Product No. | |
|---|---|---|---|
| PAEK | Manual | C2V-1346 | |
| With air actuator | C2V-1346A | ||
| With Modular Universal Actuator Choose interface: |
None | C2V-1346UMH | |
| RS-232 | C2V-1346UMHA | ||
| RS-485 | C2V-1346UMHF | ||
| BCD | C2V-1346UMHC | ||
| With universal actuator Choose interface: |
None | C2V-1346EUH | |
| RS-232 | C2V-1346EUHA | ||
| RS-485 | C2V-1346EUHF | ||
| USB | C2V-1346EUHB | ||
| BCD | C2V-1346EUHC | ||
| Replacement valve | C2V-1346D | ||
| Replacement rotor | C2-13R6 | ||
| Replacement stator | C2V-1C46 | ||
| N60 SS | Manual | C2V-1006 | |
| With air actuator | C2V-1006A | ||
| With Modular Universal Actuator Choose interface: |
None | C2V-1006UMH | |
| RS-232 | C2V-1006UMHA | ||
| RS-485 | C2V-1006UMHF | ||
| BCD | C2V-1006UMHC | ||
| With universal actuator Choose interface: |
None | C2V-1006EUH | |
| RS-232 | C2V-1006EUHA | ||
| RS-485 | C2V-1006EUHF | ||
| USB | C2V-1006EUHB | ||
| BCD | C2V-1006EUHC | ||
| Replacement valve | C2V-1006D | ||
| Replacement rotor | C2-10R6 | ||
| Replacement stator | C2V-1C06 | ||
