Integrated Motor/Analytical Injectors - PAEK, 1/16" fittings

5,000 psi
Analytical
Integrated
1/16" 0.40 mm
integrated motor/selector
Integrated motor/injectors with PAEK stator and 1/16" PEEK fittings
close move

Model C52 injectors are integrated motor/valve assemblies designed specifically to be built into an OEM system. Control is simplified to require a single contact closure; the injector's position is determined by whether the closure is held high or low.

Valves include 1/16" PEEK nuts and ferrules. Order sample loops separately.

Select the desired number of ports below to view product numbers:

4 port valves

6 port valves

8 port valves

10 port valves

5,000 psi
Analytical
Integrated
1/16" 0.40 mm
6 port schematic

4 port valves

Description Product No.
Valve w/integrated actuator C52-2344I
Valve w/integrated actuator, RS-232 version C52-2344IA
Valve w/integrated actuator, RS-485 version C52-2344IF
With motor/sensor only C52-2344I-S
Replacement rotor C2-23R4
Replacement stator C52-2C44
5,000 psi
Analytical
Integrated
1/16" 0.40 mm
6 port schematic

6 port valves

Description Product No.
Valve w/integrated actuator C52-2346I
Valve w/integrated actuator, RS-232 version C52-2346IA
Valve w/integrated actuator, RS-485 version C52-2346IF
With motor/sensor only C52-2346I-S
Replacement rotor C2-23R6
Replacement stator C52-2C46
5,000 psi
Analytical
Integrated
1/16" 0.40 mm
8 port schematic

8 port valves

Description Product No.
Valve w/integrated actuator C52-2348I
Valve w/integrated actuator, RS-232 version C52-2346IA
Valve w/integrated actuator, RS-485 version C52-2346IF
With motor/sensor only C52-2348I-S
Replacement rotor C2-23R8H
Replacement stator C52-2C48
5,000 psi
Analytical
Integrated
1/16" 0.40 mm
10 port schematic

10 port valves

Description Product No.
Valve w/integrated actuator C52-2340I
Valve w/integrated actuator, RS-232 version C52-2348IA
Valve w/integrated actuator, RS-485 version C52-2348IF
With motor/sensor only C52-2340I-S
Replacement rotor C2-23R0H
Replacement stator C52-2C40

SPECIFICATIONS

Max press: 5,000 psi liq
Max temp: 50°C
Stator: PAEK
Rotor: Valcon E

OPTIONS

Contact us for more info about:

  • Hastelloy C or titanium stator
  • 0.75 mm bore

MORE INFORMATION

SEE ALSO

CE NOTE

  • These products are defined by CE as "components", and are fully RoHS compliant and designed to pass all CE testing when properly installed in a CE compliant instrument. Some CE testing has been done. A copy of the results are available from our compliance officer upon request.