Integrated Motor/Injectors - 1/4-28 fittings for 1/8" tubing

Low pressure
Integrated
1/4-28 Internal
1/8" 1.50 mm

Model 62 injectors are integrated motor/valve assemblies designed specifically to be built into an OEM system. Control is simplified to require a single contact closure; the injector's position is determined by whether the closure is held high or low.

Valves include multicolored Cheminert flangeless fittings for 1/8"tubing. Sample loops must be ordered separately.

integrated motor/low pressure valve
Integrated motor/injector with PPS stator and 1/4-28 fittings for 1/8" tubing
close move

Integrated motor/low pressure injector or switching valve

Description Ports Product No.
Valve with motor, sensor, and controller 4 C62-6184I
6 C62-6186I
8 C62D-6188I
10 C62D-6180I
Valve with motor, sensor, and controller,
  RS-232 version
4 C62-6184IA
6 C62-6186IA
8 C62D-6188IA
10 C62D-6180IA
Valve with motor, sensor, and controller,
  RS-485 version
4 C62-6184IF
6 C62-6186IF
8 C62D-6188IF
10 C62D-6180IF
Valve with motor and sensor only 4 C62-6184I-S
6 C62-6186I-S
8 C62D-6188I-S
10 C62D-6180I-S
Replacement rotor 4 C62-614
6 C62-616
8 C22-618
10 C62-610
Replacement stator 4 C62-684
6 C62-686
8 C62-688
10 C62-680

SPECIFICATIONS

Max press: 250 psi liq
Max temp: 50°C
Stator: PPS
Rotor: Valcon E2

OPTIONS

Contact us for more info about:

  • Other polymer rotors and stators

MORE INFORMATION

SEE ALSO

CE NOTE

  • These products are defined by CE as "components", and are fully RoHS compliant and designed to pass all CE testing when properly installed in a CE compliant instrument. Some CE testing has been done. A copy of the results are available from our compliance officer upon request.