Heated column enclosures allow a column to be operated at temperatures independent of other controlled zones in the instrument. They are similar in construction to our heated valve enclosures, except instead of a valve heater block they contain a column mandrel which will accept 1/8" columns up to 10' long. The HCE2 can have a heated valve installed adjacent to the heated column, with a valve heater block ordered separately.
All enclosures include a heater block and a heater cartridge with line cord. The product number chart below lists the heater size typically required to heat the column to the indicated temperature.
Available in: | 110 VAC |
230 VAC |
Non-CE; use restricted within the EU.
Heated column enclosures - 110 VAC
Includes insulated enclosure and heater assembly (column mandrel, heater cartridge, line cord).
Insulation is 1/2" thick, so internal dimensions are 1" smaller than the exterior size given below.
Capacity | External dimensions | Rating | Product No. |
---|---|---|---|
1 column | 4" x 4-1/4" x 3-5/8" deep | 65W/ 350°C |
HCE1 |
4-1/4" x 5-1/8" x 3-5/8" deep | 65W/ 350°C |
HCEB | |
8" x 8" x 6" deep | 65W/ 350°C |
HCEC | |
2 columns | 8" x 5-1/4" x 4" deep | 65W/ 350°C |
HCE2 |
Additional column mandrel (no heater assembly) | CM |
Heated column enclosures - 230 VAC
Includes insulated enclosure and heater assembly (column mandrel, heater cartridge, line cord).
Insulation is 1/2" thick, so internal dimensions are 1" smaller than the exterior size given below.
Capacity | External dimensions | Rating | Product No. |
---|---|---|---|
1 column | 4" x 4-1/4" x 3-5/8" deep | 65W/ 350°C |
HCE1-220 |
4-1/4" x 5-1/8" x 3-5/8" deep | 65W/ 350°C |
HCEB-220 | |
8" x 8" x 6" deep | 65W/ 350°C |
HCEC-220 | |
2 columns | 8" x 5-1/4" x 4" deep | 65W/ 350°C |
HCE2-220 |
Additional column mandrel (no heater assembly) | CM |